ASTM A595/A595M-2014 結構用錐形低碳鋼管或高強度低碳鋼管規格

　　ASTM A595/A595M-2014

　　中文名稱：結構用錐形低碳鋼管或高強度低碳鋼管規格

　　英文名稱：Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use

　　原文名稱：Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use

　　范 圍：This specification covers three grades of seam-welded, round, tapered steel tubes for structural use. Grades A and B are of low-carbon steel or high-strength low-alloy steel composition and Grade C is of weather-resistance steel composition. The tube steel shall be hot-rolled aluminum-semikilled or fine-grained killed sheet or plate manufactured by one or more of the following processes: open-hearth, basic-oxygen, or electric-furnace. The tubes shall be made from trapezoidal sheet or plate that is preformed and then seam welded. They shall be brought to final size and properties by roll compressing cold on a hardened mandrel. A tensile test shall be done to determine the yield strength and the ultimate tensile strength of the tubes.

　　發布日期：2014-05-01

　　實施日期：2014-05-01

　　標準組織：美國試驗與材料協會標準(ASTM)

　　ICS分類號：(77.140.75)特殊用管鋼

　　中國標準分類號：(H48)鋼管、鑄鐵管

　　同一中標分類下的其他標準

　　• API SPEC 5L-2007

　　• API SPEC 15HR-2001

　　• ASME B32.5-1977(R2004)

　　除管子外的管狀金屬制品佳米制尺寸

　　• ASTM A134-1996(2005)

　　電熔(弧)焊鋼管(尺寸NPS 16及以上)規格

　　• ASTM A135/A135M-2009(2014)

　　電阻焊鋼管規格

　　同一標準分類下的其他標準

　　• ASME B32.5-1977(R2004)

　　除管子外的管狀金屬制品佳米制尺寸

　　• ASTM A595/A595M-2014

　　結構用錐形低碳鋼管或高強度低碳鋼管規格

　　• ASTM A1005/A1005M-2000(2010)

　　干線用平端縱向與螺旋狀焊縫雙重埋弧焊黑鋼管規格

　　• ASTM A1006/A1006M-2000(2010)

　　平端激光束焊接干線用黑鋼管規格