ASTM A181/A181M-2014 通用鍛制碳素鋼管的規格

　　ASTM A181/A181M-2014

　　中文名稱：通用鍛制碳素鋼管的規格

　　英文名稱：Standard Specification for Carbon Steel Forgings, for General-Purpose Piping

　　原文名稱：Standard Specification for Carbon Steel Forgings, for General-Purpose Piping

　　范 圍：This specification covers the carbon steel forgings used for general-purpose piping. Two classes of material are covered, Classes 60 and 70, and classified according to their mechanical properties. Except for flanges of all types, up to and including NPS 4 may be machined from hot-rolled or forged bar. Elbows, return bends, tees, and header tees shall not be machined directly from bar stock. Forgings shall be protected against sudden or too rapid cooling from the rolling or forging while passing through critical range. Heat treatment is neither required nor prohibited, but when applied, it shall consist of tempering, annealing, normalizing, or normalizing and tempering. Heat analysis shall be made to determine the percentage of the following elements: carbon, manganese, phosphorus, silicon, and sulfur. The mechanical properties of the material shall conform to the required tensile properties: tensile strength, yield strength, elongation, and reduction of area.

　　發布日期：2014-10-01

　　實施日期：2014-10-01

　　標準組織：美國試驗與材料協會標準(ASTM)

　　ICS分類號：(77.140.85)鋼鐵鍛件

　　中國標準分類號：(H48)鋼管、鑄鐵管

　　同一中標分類下的其他標準

　　• API SPEC 5L-2007

　　• API SPEC 15HR-2001

　　• ASME B32.5-1977(R2004)除管子外的管狀金屬制品佳米制尺寸

　　• ASTM A134-1996(2005)電熔(弧)焊鋼管(尺寸NPS 16及以上)規格

　　• ASTM A135/A135M-2009(2014)電阻焊鋼管規格

　　• AECMA PREN 2197-1998航空航天系列.經溶液淀積處理的耐熱合金 NI-PH1701(NiCr15Co14Al5Ti4Mo4) 鍛件 D<(InDex) FE-PA2301(NiCr21Fe18Mo9) 溶解處理?xiàng)l材和部件 D<(INDEX)e>200mm-R(INDEX)>

　　• ASME Y14.8-2009鑄件、鍛件和模壓件

　　• ASTM A105/A105M-2014管道設施用碳鋼鑄件的標準規范

　　• ASTM A181/A181M-2014通用鍛制碳素鋼管的規格